Flash Magic Forum

In-System Programming Support => P89V51Rx2/P89LV51Rx2 => Topic started by: pmax65 on June 05, 2008, 02:15:56 am

Title: P89V51RC2FN can't erase all Flash or block used by hex file issue
Post by: pmax65 on June 05, 2008, 02:15:56 am
I already read about this problem in other posts in this forum, but I don't have found the solution.
I can't erase the whole Flash or the block used by the hex file using the P89V51RC2FN with FM.

Does anybody solved the issue?

I know, I can erase the whole MCU by [ISP] > [Erase Page...] > [Erase All], but anybody knows why doesn't the blocks erase work?

May be, is it an ISP command bug?

Bye,

Massimo
Title: Re: P89V51RC2FN can't erase all Flash or block used by hex file issue
Post by: Andy Ayre on June 05, 2008, 09:10:43 am
First try upgrading your bootloader as this sounds like a past problem that was solved in an update. You can get the new bootloader from the resources section of the Flash Magic website. Be sure to follow all the instructions.

  http://www.flashmagictool.com/resources.html

Andy