Text only | Text with Images

Flash Magic Forum

In-System Programming Support => P89V51Rx2/P89LV51Rx2 => Topic started by: dptxp on February 21, 2011, 10:17:47 PM

Title: Have to program twice to program 2X clock bit and secity bit in RD2
Post by: dptxp on February 21, 2011, 10:17:47 PM
With both enabled, only the Clock bit gets set (2X mode) and and device has to be set into ISP mode again
to program the P89VRD2 again to set the security bit.

This is true for all the versions I have used so far.
Title: Re: Have to program twice to program 2X clock bit and secity bit in RD2
Post by: Andy Ayre on February 22, 2011, 01:31:48 AM
That might be an issue with older bootloaders in this particular device as it sounds familiar. Try the version 7 bootloader.

Andy
Text only | Text with Images