Text only | Text with Images

Flash Magic Forum

In-System Programming Support => ARM Cortex => Topic started by: JSalisbury on September 13, 2011, 06:05:21 AM

Title: How to program the LPC1114 over a half duplex rs485 link?
Post by: JSalisbury on September 13, 2011, 06:05:21 AM
Hi,
I would like to program some LPC1114 devices via an RS485 half duplex link. Is there a way of flash magic supporting this? Is there a way of setting the timings to allow the transmitter at the far end be controlled by a slave processor?

Thanks
Title: Re: How to program the LPC1114 over a half duplex rs485 link?
Post by: Andy Ayre on September 16, 2011, 01:10:42 AM
Go to Options -> Advanced Options and check the Half Duplex option. You can increase the timeouts in the same window.

Andy
Text only | Text with Images