Text only | Text with Images

Flash Magic Forum

In-System Programming Support => LPC2xxx => Topic started by: Lee on February 14, 2012, 04:28:40 AM

Title: Programming LPC2109 through flash magic command line v6.03
Post by: Lee on February 14, 2012, 04:28:40 AM
Hello Sirs,

I am attempting to program LPC2109 using flash magic. It works OK through the GUI interface, but through the command line, i got the error message:

ERROR: Invalid parameters for DEVICE directive: DEVICE(LPC2109,12.0000000)

The command file was directly saved from option "File > Save Command Line Directives" after a successful programming of the device through the GUI.

There are the commands from the GUI:

COM(1, 9600)
DEVICE(LPC2109, 12.000000)
HARDWARE(BOOTEXEC, 50, 100)
ERASEUSED(D:\Project\Teradyne\Enics\1833689\Programming_files\DIM8_01_00.hex, PROTECTISP)
HEXFILE(D:\Project\Teradyne\Enics\1833689\Programming_files\DIM8_01_00.hex, NOCHECKSUMS, NOFILL, PROTECTISP)
VERIFY(D:\Project\Teradyne\Enics\1833689\Programming_files\DIM8_01_00.hex, NOCHECKSUMS)

Please give me advice.

Thanks in advance.
Title: Re: Programming LPC2109 through flash magic command line v6.03
Post by: Andy Ayre on February 17, 2012, 01:37:41 PM
Fixed in version 6.10.
Text only | Text with Images