Print Page - LPC-Link2 as SWD interface

Title: LPC-Link2 as SWD interface
Post by: GonzaloSipel on January 08, 2016, 06:17:38 AM

Hi everyone:
We have developed a custom board based on LPC1788 and we have written a firmware which is 450 kbytes long. We have tried to upload code using a COM port and although this works fine, it is too slow. Now we are going to buy a LPC-Link2 board and we would like to know if there any limit about size code or any other things.
Regards.

Title: Re: LPC-Link2 as SWD interface
Post by: Andy Ayre on January 11, 2016, 12:49:56 AM

There is no limit on code size.

Andy

Flash Magic Forum

In-System Programming Support => ARM Cortex => Topic started by: GonzaloSipel on January 08, 2016, 06:17:38 AM