Print Page - How to program hex file to P89C52X2BN

Title: How to program hex file to P89C52X2BN
Post by: KP on July 08, 2020, 09:09:24 AM

Hello everybody,

Recently i purchased P89C52X2BN microcontroller.
I wrote c program in keil microvision & created hex file.

now as i use Flash Magic to burn hex file ( lastly used P89v51RD2 ic),
i tried to do so....but there is no P89C52X2BN ic in selection.

please any one guide me to successfully program this controller ic.

regards,
KP

Title: Re: How to program hex file to P89C52X2BN
Post by: Andy Ayre on July 08, 2020, 11:28:28 AM

Sorry, your part is not supported by Flash Magic. A list of supported devices can be found here. Note that you will need V11 to program 8051s:

https://www.flashmagictool.com/supporteddevices.html

Andy

Flash Magic Forum

In-System Programming Support => P89C51Rx+/P89C51Rx2/P89C66x/P89C6xX2/P89V66x => Topic started by: KP on July 08, 2020, 09:09:24 AM