Dear,
Do you have some update?
Do you have some update?
- Welcome to Flash Magic Forum.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#1
ARM Cortex / Re: LPC54606 report first block CRC error by Flash magic 11.0 under UART ISP mode
March 18, 2018, 07:50:52 PM #2
ARM Cortex / LPC54606 report first block CRC error by Flash magic 11.0 under UART ISP mode
March 16, 2018, 04:46:04 PM
I have verified on official lpc54608 board, I also meet the same problem with my target LPC54606 board, after flash magic download the code, then do the verify.
I meet first block CRC error problem as attached picture, and go to the next step, the flash magic say the address 0x00000004 is different.
But I use the JLINK to read out the chip flash 0x00000004, and compare it with the .hex file, I find the data is totally the same.
So, I think it is may caused by the flash magic bug. Could you help check it?
I meet first block CRC error problem as attached picture, and go to the next step, the flash magic say the address 0x00000004 is different.
But I use the JLINK to read out the chip flash 0x00000004, and compare it with the .hex file, I find the data is totally the same.
So, I think it is may caused by the flash magic bug. Could you help check it?
Pages1