I am having a serious problem with Flash Magic: Downloaded from:
To carry out firmware (basic software) updating in MagicSat Easy/Flat Sat Easy systems
you are requested to:
• Use a Microsoft Windows operating environment (2000, Xp)
• Download and Install the USB driver for Teleco products, available at the following
link http://www.support-telecogroup.com/software/InstallTelecoUsbDriver.exe
• Download and Install the programming software available at the following link:
http://www.flashmagictool.com/download.html&d=FlashMagic.exe
• Download and Install the microcode (firmware), available at the following link :
http://www.support-telecogroup.com/software/InstallMagicSatEasyFirmware.exe
• Once the individual software packages have been installed, use a USB cable to
connect the MagicSat Easy/Flat Sat Easy to your computer and wait for correct
recognition by your computer.
• Check on which virtual COM port the MagicSat Easy system appears to be
recognised (in the example, it appears as visible on the COM3 port).
HOWEVER - the Program does not correspond with the PDF Manual etc and asks for a Device to set.
For the MagicSat Easy I do not know what to select and have now lost ALL programming on the Sat System system. This included I am having a serious problem with Flash Magic: Downloaded from:
To carry out firmware (basic software) updating in MagicSat Easy/Flat Sat Easy systems
you are requested to:
• Use a Microsoft Windows operating environment (2000, Xp)
• Download and Install the USB driver for Teleco products, available at the following
link http://www.support-telecogroup.com/software/InstallTelecoUsbDriver.exe
• Download and Install the programming software available at the following link:
http://www.flashmagictool.com/download.html&d=FlashMagic.exe
• Download and Install the microcode (firmware), available at the following link :
http://www.support-telecogroup.com/software/InstallMagicSatEasyFirmware.exe
• Once the individual software packages have been installed, use a USB cable to
connect the MagicSat Easy/Flat Sat Easy to your computer and wait for correct
recognition by your computer.
• Check on which virtual COM port the MagicSat Easy system appears to be
recognised (in the example, it appears as visible on the COM3 port).
HOWEVER - the Program does not correspond with the PDF Manual etc and asks for a Device to set.
For the MagicSat Easy I do not know what to select and have now lost ALL programming on the Sat System system. This included Automatically Parking the Dish on my Motorhome to enable me to drive home!
To carry out firmware (basic software) updating in MagicSat Easy/Flat Sat Easy systems
you are requested to:
• Use a Microsoft Windows operating environment (2000, Xp)
• Download and Install the USB driver for Teleco products, available at the following
link http://www.support-telecogroup.com/software/InstallTelecoUsbDriver.exe
• Download and Install the programming software available at the following link:
http://www.flashmagictool.com/download.html&d=FlashMagic.exe
• Download and Install the microcode (firmware), available at the following link :
http://www.support-telecogroup.com/software/InstallMagicSatEasyFirmware.exe
• Once the individual software packages have been installed, use a USB cable to
connect the MagicSat Easy/Flat Sat Easy to your computer and wait for correct
recognition by your computer.
• Check on which virtual COM port the MagicSat Easy system appears to be
recognised (in the example, it appears as visible on the COM3 port).
HOWEVER - the Program does not correspond with the PDF Manual etc and asks for a Device to set.
For the MagicSat Easy I do not know what to select and have now lost ALL programming on the Sat System system. This included I am having a serious problem with Flash Magic: Downloaded from:
To carry out firmware (basic software) updating in MagicSat Easy/Flat Sat Easy systems
you are requested to:
• Use a Microsoft Windows operating environment (2000, Xp)
• Download and Install the USB driver for Teleco products, available at the following
link http://www.support-telecogroup.com/software/InstallTelecoUsbDriver.exe
• Download and Install the programming software available at the following link:
http://www.flashmagictool.com/download.html&d=FlashMagic.exe
• Download and Install the microcode (firmware), available at the following link :
http://www.support-telecogroup.com/software/InstallMagicSatEasyFirmware.exe
• Once the individual software packages have been installed, use a USB cable to
connect the MagicSat Easy/Flat Sat Easy to your computer and wait for correct
recognition by your computer.
• Check on which virtual COM port the MagicSat Easy system appears to be
recognised (in the example, it appears as visible on the COM3 port).
HOWEVER - the Program does not correspond with the PDF Manual etc and asks for a Device to set.
For the MagicSat Easy I do not know what to select and have now lost ALL programming on the Sat System system. This included Automatically Parking the Dish on my Motorhome to enable me to drive home!