Show Posts
1
ARM Cortex / LPC1227/301 Command Line issue
« on: November 17, 2015, 06:34:38 AM »
Hi Sir,
I am successfully to program NXP LPC1227/301 using Flash Magic GUI (refer to IMG_20151117_215733.jpg), but fail to program using command line (refer to IMG_20151117_220021.jpg).
Below is the command line which i type to the command Prompt, please correct me if any command wrong.
C:\Program Files\Flash Magic>FM COM(4,38400) DEVICE(LPC1227/301,11.0592) ERASE(DEVICE,PROTECTISP) HEXFILE("C:\RE_601_COMM_02_20_07.hex",NOCHECKSUMS,FILL,PROTECTISP) VERIFY("C:\RE_601_COMM_02_20_07.hex",NOCHECKSUMS) READCRC(DEVICE)
THANKS
I am successfully to program NXP LPC1227/301 using Flash Magic GUI (refer to IMG_20151117_215733.jpg), but fail to program using command line (refer to IMG_20151117_220021.jpg).
Below is the command line which i type to the command Prompt, please correct me if any command wrong.
C:\Program Files\Flash Magic>FM COM(4,38400) DEVICE(LPC1227/301,11.0592) ERASE(DEVICE,PROTECTISP) HEXFILE("C:\RE_601_COMM_02_20_07.hex",NOCHECKSUMS,FILL,PROTECTISP) VERIFY("C:\RE_601_COMM_02_20_07.hex",NOCHECKSUMS) READCRC(DEVICE)
THANKS