i wish use no_touch

[eagle]

Hi,

I have a dude, the NoTouch for P89LPC935 is for ISP or IAP mode?

Because i have read differents papers, and They are contradictory. I wish use this function for ISP mode.

The boot vector for ISP is 1FH, and in your function puts 01H, and the direction of call (PGM_MTP) must be changed, because FF03H is wrong, no?

thanks.

[Andy Ayre]

I believe you have to do a bit of customizing for the specific device you are using. The boot vector is not 1FH for all LPC9xx devices. Also the entry point changes depending on the device.

Andy

[eagle]

OK.

I use P89LPC935. How can the boot vector change without I find out?

The boot vector for this uC is 0x1F, but I don'n know if when i program the uC i will change this boot vector. Or the boot vector is fixed?

[Andy Ayre]

When you program the device with Flash Magic the boot vector isn't changed.

Andy

[eagle]

Thanks,

I have one final dude, do I need put the funtion "LPC_ISP_8K_V04.a51" of the aplication note "AN10337" for ISP programming?

Because i don't know if the ISP code is erased or not. Thanks.

[Andy Ayre]

If you have accidentally erased the bootloader then you need to restore it by building and programming the assembler file. However to do that you need to use either ICP or a parallel programmer.

Andy

[eagle]

Then it isn't necessary.

Thanks.