Default programming of BOOTSTAT on P89LPC932A1

Started by Philip Garman, April 26, 2005, 08:50:03 AM

Previous topic - Next topic

Philip Garman

If BOOTSTAT (Default: 0x01) is not specified in the HEX file, does Flashmagic turn this bit off automatically so that user code will execute?

Thanks
P

Andy Ayre

Are you referring to the special record at FFF0H for the LPC9xx family? If so that bit is ignored, along with the boot vector.

Flash Magic always clears the status bit/byte after programming a hex file to ensure that on the next reset the code will run.

Embedded Systems Academy, Inc.
support at esacademy dot com

Philip Garman