Support device with off chip ROM? (LPC1830 with SPIFI)

[Andy Ayre]

As I mentioned in my December 5th post above, you need to set the BOOTn pins to start the BootROM feature. This is completely different to the ISP UART-based bootloader.

I can't recall if the LPC1857 has that feature, however we are working right now on an improvement to the external flash bootloader system to support the ISP UART-based bootloaders. It should be completed sometime this week or next week.

Andy

[Cusko]

Ok, now I get it. These are two different protocols. Thx for help.

If you need any testing or anything else with the new functionality just let me know. I will be glad to help.

And if I may suggest something: The load to the flash Bank0 and Bank1 should be at the same time. You just choose which one you activate.

Bostjan

[Cusko]

As I mentioned in my December 5th post above, you need to set the BOOTn pins to start the BootROM feature. This is completely different to the ISP UART-based bootloader.

I can't recall if the LPC1857 has that feature, however we are working right now on an improvement to the external flash bootloader system to support the ISP UART-based bootloaders. It should be completed sometime this week or next week.

Andy

Any news on that?

[Andy Ayre]

It was added to version 7.21.

Any