Author Topic: IAP  (Read 3903 times)

Saimon

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
IAP
« on: June 19, 2003, 07:57:42 am »
Hello forum,
 here you are my problem.
It's my first time with IAP and I wan to know how to program the STATUS BYTE with my firmware written in assembler.
Thanks
Bye
Saimon


Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2190
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: IAP
« Reply #1 on: June 19, 2003, 08:30:26 am »
Which device are you using? If it is the Rx2Hxx, 66x or LPC932, then we have already written the assembler to make it work. You can download it from:

http://www.esacademy.com/faq/progs/flash.htm

For any other devices we currently do not have anything, so you will have to take the closest one of the two libraries and adapt it yourself.

Embedded Systems Academy, Inc.
support at esacademy dot com