« previous next »
Pages: [1]

Author Topic: COM Port support  (Read 8044 times)

Charles Osborn

  • Guest
COM Port support
« on: March 18, 2005, 11:31:28 AM »
When will Flash magic support com ports greater than 4?
Logged

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2190
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: COM Port support
« Reply #1 on: March 18, 2005, 11:35:24 AM »
It already does. Please read the Hints and Tips application note:

http://www.esacademy.com/software/flashmagic/appnotes/HintsandTipsAppNote.pdf

Logged
Embedded Systems Academy, Inc.
support at esacademy dot com

Trung Le

  • Guest
Re: COM Port support
« Reply #2 on: April 12, 2005, 09:45:41 PM »
I use 89C51RA2BA, but when I connect to Flash Magic through RS232 it notice " Unnable to connect at the specified baud rate. Try reducing the baud rate....". I checked hardware carefully. Pls. help me this probem.
Thanks and best regards,
Trung
Logged

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2190
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: COM Port support
« Reply #3 on: April 12, 2005, 09:49:45 PM »
Have you read through the Flash Magic application note "what to do when ISP does not work"? If not, please work your way through it as it will guide you to narrow the problem down.

Logged
Embedded Systems Academy, Inc.
support at esacademy dot com
Pages: [1]
« previous next »