Author Topic: LPC9107 ISp-ICP bridge  (Read 4263 times)

Wojciech Lapinski

  • Guest
LPC9107 ISp-ICP bridge
« on: May 29, 2005, 03:34:57 am »
Hi all,
Does anybody have any experiences with programming of new LPC9100 devices.
I'm trying to program it by MCB900 (LPC932 loading with prog90x.hex v 1.4) board through proper cabel (rev 2 with NPN transistor) and got only "FF".
I suppose it is problem with getting into ICP state.
Pleas help me !


regards

Wojtek Lapinski
Poland

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2172
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC9107 ISp-ICP bridge
« Reply #1 on: May 29, 2005, 02:15:34 pm »
I've used an LPC9107 without problems, however I used a PAB900 and an MCB900 with version 1.4 of prog90x.hex programmed into the LPC935. The hex file works, so it must be a hardware problem somewhere.

Embedded Systems Academy, Inc.
support at esacademy dot com