FM PC Serial Control - LC900series

Started by Joseph Goldburg, June 07, 2005, 06:33:18 PM

Previous topic - Next topic

Joseph Goldburg

Hi FM,

Can you advise how the DTR  RTS and other PC signals operate to create the 3 pulses reset for ISP mode.

I wish to build my board and use the same signals out of the serial port.

An explaination on the Hardware config used in the 3 pulses reset method would be appreciated.


Joseph

Andy Ayre

You need to copy the circuit from the Keil MCB900 board. There is a link to the help file containing the schematic diagram on the Flash Magic web page.

Embedded Systems Academy, Inc.
support at esacademy dot com