Author Topic: Solution to ICP block 0 programming problem  (Read 2582 times)

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2178
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Solution to ICP block 0 programming problem
« on: October 28, 2005, 12:08:16 pm »
Recent versions of Flash Magic have uncovered a bug in the ICP to ISP bridge code. The symptom was that the first few bytes of block 0 were not correctly programmed, leading to an incorrect CRC for that block.

On the Flash Magic web page you can now download version 1.6 of the ICP to ISP bridge code. This will resolve the problem.

Embedded Systems Academy, Inc.
support at esacademy dot com