Author Topic: P89V51RD2BN  (Read 4509 times)


  • Jr. Member
  • **
  • Posts: 1
    • View Profile
« on: June 14, 2006, 12:35:10 am »
Dear Sirs,

I am a 2nd year Instrumentation student.  I am very keen
on studying microcontrollers n so I bought a kit for $9/-.
The kit has a Philips P89V51RD2BN chip, a 12.0 Mhz Xtal
and a Max 232 chip in the Serial circuitry.  P0, P1 n P2
are taken to VCC thru 4.7K res. banks.

My aim for this holiday session is to load a program on to
the chip. I have Philips "Flash Magic" and have got Flash
to communicate with the chip i.e. it read the chip signature.

I have very limited sources for studying assembly
programming and so I have not yet got down to writing
programs myself.  I have 2 ready programs taken from
Myke Predko's book "Programming n Customizing 8051 MC".

Program 1 is a State Machine program written for a
DS80C320 chip (I understand that this chip is just a faster
version of the 80C51 but I'm not sure if I could just load
this program onto my chip and see it run).  I request you
to alter this program for my chip (P89V51RD2BN) if
necessary and also re-write the Dlay to give me 5sec delays.
I've written in a delay from my limited understanding
but it's not slow enough.

Program 2 is a pseudo random generator for Christmas
lights written for a DS87C520 chip.  Again cud u please
alter the program if necessary for my chip.

Once I get these programs running on my chip I will
have achieved my initial holiday target, I then intend
to get into assembly programming, hopefully I will
soon be writing efficient programs myself.

I am using UMPS (an IDE) but they have not included
the Philips chips in their library hence I could not
check this out for myself.  Would you know of a "free"
demo IDE for the Philips chips (P89V51RD2BN included).

Also is there any material I can use to study assembly
for Microcontrollers (everything seems to be written for
the 80x86 series).

Many thanks.

Hope to hear from you soon,

Lionel Craig D'Silva

PS - Attached are the two programs
;  PROG1 - State Machines
;  This Application Demonstrates how a set of traffic lights could
;   be controlled in the 8051 using a State Machine and Table Jumps.  
;  This program will run in the UMPS simulator for a DS80C320.
;  Myke Predko
;  98.02.18
;  Hardware Notes:
;   This program is only meant to run on the Simulator
;    It could be modified to run in hardware by making "Dlay" more than
;    a dummy routine
;  North/South Lights
;   NSGreen  - P1.0
;   NSYellow - P1.1
;   NSRed    - P1.2
;  East/West Lights
;   EWGreen  - P1.4
;   EWYellow - P1.5
;   EWRed    - P1.6

;  Variable Declarations
State EQU 020h         ;  The Current State Variable
StateDir EQU 004h               ;  The Direction Bit - Bit 4 of 020h
;  Bit States
;   Bit 4: _EW/NS - This Bit is Set for NS, Reset for East/West
;   Low Nybble: Current Light State

;  R0 is used as an Index Pointer to Array
;  R1 is used as the Source Location for the Control Store Table

Array EQU 0B0h         ;  Define Array in Scratchpad RAM

;  Mainline
 org 0                          ;  Execution Starts Here

  mov    State,#0      ;  Start with E/W "Red"

  mov    P1,#0BBh               ;  Turn on the Red Lights

  mov    DPTR,#LightTable   ;  Have the DPTR Point to the

Loop:            ;  Loop Back Here for Each Light State

  acall    NextLight

  sjmp    Loop

NextLight:         ;  Now, Turn Off the Current Light and Turn
            ;   The Next One
  mov    A,State      ;  Get the State x2
  rl    A
  anl    A,#0DFh      ;  Clear the _EW/NS Flag

  jmp    @A+DPTR      ;  Jump to the Appropriate Response


  sjmp    GreenLight      ;  Currently Have a Red Light, Go to Green
  sjmp    YellowLight      ;  Currently Have a Green Light, Go to Yellow
  sjmp    RedLight      ;  Currently Have a Yellow Light, Go to Red

GreenLight:         ;  Turn the Light to Green

  mov    A,#0EBh      ;  Are We turning on the E/W Light
  jnb    StateDir,GL_EW
  mov    A,#0BEh      ;   No - Do the North South
  mov    P1,A         ;  Now, Turn on the Light

  mov    R0,#6         ;  Delay for a Green Light Period
  acall    Dlay

  inc    State         ;  Increment to the Next State


YellowLight:         ;  Turn the Light to Yellow

  mov    A,#0DBh      ;  Are We turning on the E/W Light
  jnb    StateDir,YL_EW
  mov    A,#0BDh        ;   No - Do the North South
  mov    P1,A         ;  Now, Turn on the Light

  mov    R0,#6      ;  Delay for a Yellow Light Period
  acall    Dlay

  inc    State         ;  Increment to the Next State


RedLight:         ;  Turn the Light to Red

  mov    P1,#0BBh      ;  Turn Everything to Red

  mov    R0,#6         ;  Delay for a Red Light Period
  acall    Dlay

  mov    A,#0F0h      ;  Reset back to Green for the Next Light
  anl    State,A

  cpl    StateDir      ;  Change Which Light is Active


Dlay:            ;  Delay a Set amount of Time for Each Light
  mov  R0,#6
  mov  R2,#255


  djnz R0,DlayLoop
  djnz R2,DlayLoop

;  PROG2 - Psuedo-Random LED Display
;  This Application Displays a psuedo Random 16 Bit Number
;   Generated by a single Tap CRC at Bit 10 (XOR'd with Bit 15).
;  The LSB is Bit 10 ^ Bit 15
;           = ( !Bit 10 & Bit 15 ) | ( Bit 10 & !Bit 15 )
;  This algorithm will give about 61K Different Patterns
;  A Quarter Second Delay is placed between Every New LED Pattern.  
;  This display is suitable for Doing Christmas Lights.  
;  Myke Predko
;  98.02.22
;  Hardware Notes:
;  80C520 Running at 4 MHz
;  P1.0-7 Connected to LEDs
;  P3.0-7 Connected to LEDs

;  Variable Declarations
;  Just "A" is used for this program.  

;  Mainline
 org 0                          ;  Execution Starts Here

Loop:                           ;  Loop Here Forever

  mov    C,P3.2                 ;  Get the Bits to AND Together
  cpl    PSW.7                  ;   Invert Bit 13
  anl    C,P3.7                 ;   AND it with Bit 15
  mov    ACC.0,C                ;  Save it for Later

  mov    C,P3.7                 ;  Now, Get Bit13 * !Bit15
  cpl    PSW.7
  anl    C,P3.2

  orl    C,ACC.0                ;  OR Both Values Together in Carry

  mov    A,P1                   ;  Now, Update the 16 LED Display
  rlc    A
  mov    P1,A
  mov    A,P3
  rlc    A
  mov    P3,A

  acall  Dlay                   ;  Leave Like this for 500 msec

  sjmp   Loop                   ;  Loop Around Again

Dlay:                           ;  Delay 263 msec

  clr    A
  mov    B,#0                   ;  Longest Delay Possible

DlayLoop:                       ;  Loop Here for 500 msec
  djnz   ACC,DlayLoop           ;  Inside Loop
  djnz   B,DlayLoop


Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2178
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: P89V51RD2BN
« Reply #1 on: June 14, 2006, 07:56:42 am »
Great post, and good luck with your projects, but this forum is for discussion of ISP issues. If you have a problem or questions on ESAcademy material please email us. If you have general 8051 questions or problems try the discussion forum at

Embedded Systems Academy, Inc.
support at esacademy dot com