Erase(0x100,protectisp) LPC2132 BLOCK 8 Error!

[njwork]

Erase lpc2132 block 8  Used Erase(0x80,protectisp)  ,result Ok!
 but Erase lpc2132 block 9  Used Erase(0x100,protectisp)  ,result error!
  Soft Display:
ERROR: Invalid parameters for ERASE directive: erase(0x100,protectisp)

so I only use ERASEUSED(c:\tst.hex,PROTECTISP)  erase ;

[Andy Ayre]

The ERASE command recently changed. The first parameter should be the number of the block (0 to n). Make sure you are using the latest version of FM.