P89LPC903 ERASE(DEVICE,PROTECTISP) COM(1,19200) can't work

[njwork]

I use command line
fm.EXE DEVICE(P89LPC903,7.373)  ERASE(DEVICE,PROTECTISP) COM(1,19200)
screen display device selected  ,then halt

but i Use fm.EXE DEVICE(P89LPC903,7.373)  ERASE(1,PROTECTISP) COM(1,19200)  ,result Success;
fm.EXE DEVICE(P89LPC903,7.373)  ERASEUSED(c:\temp.hex,PROTECTISP) COM(1,19200)  ;result Success also.

[njwork]

I used version 2.51 work well!
command line is :
fm.EXE DEVICE(P89LPC903,7.373)  ERASE(DEVICE,PROTECTISP) COM(1,19200)
result :
Flash Magic Version 2.51
flashmagic.dll Version 1.97
(C) Embedded Systems Academy 2000-2006 All rights reserved
Connected
Device selected
Erase complete (DEVICE)


used version 3.27
E:\>fm.EXE DEVICE(P89LPC903,7.373)  ERASE(DEVICE,PROTECTISP) COM(1,19200)
Flash Magic Version 3.27.130
8051/XA Driver Version 2.14.130
ARM Driver Version 1.13.128
(C) Embedded Systems Academy 2000-2006 All rights reserved
Connected
Device selected
Then computer Halt!

[Andy Ayre]

Try version 3.30 and see if that helps. Let us know.

[njwork]

version 3.30 Ok! Thank You .