LPC932A1 with external crystal problem

Started by kt_chen, April 29, 2007, 11:54:55 PM

Previous topic - Next topic

kt_chen

#15
Yes, I think so. ICP is a reliable tool. I use my MCB900 with prog90x.hex, and I did an ICP bridge board, it contains a PLCC28 socket and a few circuit which I referred the ICPBridgeVddSwitch.pdf page5. While I want to program the chip, I put the chip on the bridge board and insert the board on the MCB900, then do programming.

However, I may merge the ICP bridge circuit with my circuit, and use a cable to connect my MCB900. I think this way is easy to develop for me.

Thanks,
kt_chen