FlashMagic Terminal Overrun buffer

Started by Je Gold, July 22, 2007, 04:38:36 AM

Previous topic - Next topic

Je Gold

Hi Andy,

I modified the Keil Blinky MCB2130 (LPC2138) ADC program and had the LPC2138 spit the ADC results out very frequently.

It seems the buffer in Terminal section of FlashMagic may get over run...

Buad Rate  9600 N,8,1. Keil code attached

The LPC2138 continually spits out  printf ("\nAIN0 Result = 0x%03X", val);


==> It takes a while for the terminal program to process and display the in coming data.


Just thought I would let you know.

Joe


Andy Ayre

The terminal in Flash Magic is horribly slow. Unfortunately there isn't much I can do about it without a significant re-write of code.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com