Wiring Diagram for LPC1752

Started by benedict, October 19, 2009, 08:29:44 PM

Previous topic - Next topic



Anyone can help me with the wiring diagram of the interface between PC host and LPC1752 using flashmagic production system software?  Thanks very much. :)


Andy Ayre

You need to place an RS232 transceiver between UART0 and the PC COM port. For example MAX232 and family.

You will then need to make sure you meet the conditions in the LPC1xxx user manual to start the bootloader. See the chapter on the Flash memory.

Embedded Systems Academy, Inc.
support at esacademy dot com