Have to program twice to program 2X clock bit and secity bit in RD2

Started by dptxp, February 21, 2011, 10:17:47 PM

Previous topic - Next topic

dptxp

With both enabled, only the Clock bit gets set (2X mode) and and device has to be set into ISP mode again
to program the P89VRD2 again to set the security bit.

This is true for all the versions I have used so far.

Andy Ayre

That might be an issue with older bootloaders in this particular device as it sounds familiar. Try the version 7 bootloader.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com