Author Topic: LPC1857 flash update does not work  (Read 5197 times)

Westphal

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
    • Email
LPC1857 flash update does not work
« on: October 23, 2012, 05:21:19 am »
With version 6.96.2873 I can no longer successfully update my LPC1857 component. When displaying the memory, I can see that the vector location 7 (offset 0x001C in the vector table) is not updated to the value expected. Has this feature intentionally been removed, or why does this no longer work?

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2190
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC1857 flash update does not work
« Reply #1 on: October 24, 2012, 12:59:51 am »
The LPC1857 has two flash banks and you have to tell Flash Magic which one you want to make "active". You do that by checking "Activate Flash Bank" in section 4 of the main window.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com

Westphal

  • Jr. Member
  • **
  • Posts: 2
    • View Profile
    • Email
Re: LPC1857 flash update does not work
« Reply #2 on: October 24, 2012, 02:01:38 am »
Thanks that works.

I was sure I did try that, but I must have messed it up.