LPC-Link2 as SWD interface

Started by GonzaloSipel, January 08, 2016, 06:17:38 AM

Previous topic - Next topic


Hi everyone:
We have developed a custom board based on LPC1788 and we have written a firmware which is 450 kbytes long. We have tried to upload code using  a COM port and although this works fine, it is too slow. Now we are going to buy a LPC-Link2 board and we would like to know if there any limit about size code or any other things.

Andy Ayre

There is no limit on code size.

Embedded Systems Academy, Inc.
support at esacademy dot com