Text only | Text with Images

Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: frank on April 09, 2008, 12:37:47 AM

Title: Suggestion: add a command option for NXP ICP Bridge
Post by: frank on April 09, 2008, 12:37:47 AM
I think FlashMagic should be added a command option such as "Enter ICP" for NXP ICP Bridge!

Thanks in advance!
Title: Re: Suggestion: add a command option for NXP ICP Bridge
Post by: Andy Ayre on April 09, 2008, 08:57:54 AM
The point of the NXP ICP bridge is to make ICP looks like ISP and therefore automatically convert ISP commands to the ICP signals. So there is no need for a specific command to enter ICP mode. Unless I am misunderstanding your suggestion?

Andy
Text only | Text with Images