Flash Magic Forum

In-System Programming Support => P89V51Rx2/P89LV51Rx2 => Topic started by: yuvaraj on January 27, 2009, 10:26:28 pm

Title: problem whem i am clicking start icon
Post by: yuvaraj on January 27, 2009, 10:26:28 pm
Hi
 

When click the start icon.

That time it is giving

Unable to connect specified baud rate, Try to reduce baud rate , Reset hardware to ISP mode again.

But i was used  least baud rate  2400, i reseted  the hardware so many times then also  it is giving same error,

Please guide to solve this problem



Thanks

R.Yuvaraj
Title: Re: problem whem i am clicking start icon
Post by: Andy Ayre on February 02, 2009, 10:50:47 am
Please don't start new topics when you already have one open for the same problem. Thanks.

Andy