Flash Magic Forum

In-System Programming Support => LPC9xx/LPC9xxx => Topic started by: jaderd on April 02, 2009, 01:16:18 pm

Title: To write LPC901 flash with IAP
Post by: jaderd on April 02, 2009, 01:16:18 pm
Hi. I am developing a device, and I am using the LPC901. I need record some data in the flash memory of MCU, but I did not find the command lines for this. The compiler wich I am using is uVision3, of the Keil.

It is very important to me, I am waiting response. Thanks in advance!!!