Text only | Text with Images

Flash Magic Forum

In-System Programming Support => ARM Cortex => Topic started by: Werner on December 05, 2014, 01:24:33 PM

Title: LPC1853 Can't Access Flash Bank B at 0x1B000000
Post by: Werner on December 05, 2014, 01:24:33 PM
Hi,
when I try to program (or even blank check) Flash bank B on my LPC1853 (Rev '-'), I get an error message: "Device does not support operation (no flash memory)". But the LPC1853 does have 256kB Flash on Bank B.

The Display Memory command does work on bank B, of course it shows an empty memory, since I haven't been able to program it yet.

Title: Re: LPC1853 Can't Access Flash Bank B at 0x1B000000
Post by: Andy Ayre on December 08, 2014, 03:25:37 AM
Please try version 8.61 and let us know if you still have a problem with this.

Andy
Title: Re: LPC1853 Can't Access Flash Bank B at 0x1B000000
Post by: Werner on December 08, 2014, 05:27:20 AM
Hi Andy,

V8.61 solves the problem. What a quick response!

Best regards
Werner
Text only | Text with Images