Text only | Text with Images

Flash Magic Forum

In-System Programming Support => ARM Cortex => Topic started by: romdump on August 30, 2016, 08:41:34 PM

Title: Fail to Autobaud Hitex LPC4350 Demo Board
Post by: romdump on August 30, 2016, 08:41:34 PM
Can seem to program the demo board. Hyperterminal gives me okay with ?.

I have attached my flashmagic debug log.

Please advise.

Thanks.
Title: Re: Fail to Autobaud Hitex LPC4350 Demo Board
Post by: Andy Ayre on August 31, 2016, 02:58:17 AM
Did you make the necessary connections on the board? These are shown in the device database when you select the external flash option?

Please send screenshots of your Flash Magic settings, and advanced options and photographs of the jumpers on the board.

Andy
Title: Re: Fail to Autobaud Hitex LPC4350 Demo Board
Post by: romdump on September 02, 2016, 09:55:50 AM
QuoteDid you make the necessary connections on the board? These are shown in the device database when you select the external flash option?

Yes it was a wiring issue.

Thanks.
Text only | Text with Images