FM.exe doesn't support 89C669

[Dirk Caesar]

Hello,

at first many thanks for providing Flash Magic. It's a great software!

I only have a problem with FM.exe.  The windows version FlashMagic.exe supports the P89C669 device (it's in the list). When I use the command line version FM.exe I can't select this device (not listed in the manual).
Selecting e.g. 89C668 in command DEVICE makes the programmation fail.

I'm using FlashMagic V1.77 and Dll V1.51

Can anybody help me?

Thanks a lot!
Dirk

[Andy Ayre]

The 669 will be supported on the command line in the next release of Flash Magic.

[Andy Ayre]

Version 1.79 is now available with 669 support on the command line. Let me know if you spot any problems.

[Dirk Caesar]

Hello Andy,

it's working fine!

Thank you
Dirk

[Dirk Caesar]

Hello Andy,

unfortunately I'm now facing a problem with FlashMagic in the windows as well as in the command line version (V1.79/Dll V1.52) in combination with the P89C669:

As soon as the code in the hex file to be programmed exceeds 2k bytes I get the message "Error programming the hex file. Address: 0x000803."

Thanks for your help!
Dirk

[Andy Ayre]

Dirk,

Please Email me your hex file that is causing this problem. My Email address is below and on the Flash Magic web page at the bottom. Thanks.

[Dirk Caesar]

I just sent it to "info@esacademy.com".

[Andy Ayre]

That wasn't the right address, but my collegue will forward it to me later today. Thanks.

[Dirk Caesar]

Sorry, the problem was not on your side!
The