FM.exe doesn't support 89C669

Started by Dirk Caesar, August 07, 2003, 01:49:31 AM

Previous topic - Next topic

Dirk Caesar

Hello,

at first many thanks for providing Flash Magic. It's a great software!

I only have a problem with FM.exe.  The windows version FlashMagic.exe supports the P89C669 device (it's in the list). When I use the command line version FM.exe I can't select this device (not listed in the manual).
Selecting e.g. 89C668 in command DEVICE makes the programmation fail.

I'm using FlashMagic V1.77 and Dll V1.51

Can anybody help me?

Thanks a lot!
Dirk

Andy Ayre

The 669 will be supported on the command line in the next release of Flash Magic.

Embedded Systems Academy, Inc.
support at esacademy dot com

Andy Ayre

Version 1.79 is now available with 669 support on the command line. Let me know if you spot any problems.

Embedded Systems Academy, Inc.
support at esacademy dot com

Dirk Caesar

Hello Andy,

it's working fine!

Thank you
Dirk

Dirk Caesar

Hello Andy,

unfortunately I'm now facing a problem with FlashMagic in the windows as well as in the command line version (V1.79/Dll V1.52) in combination with the P89C669:

As soon as the code in the hex file to be programmed exceeds 2k bytes I get the message "Error programming the hex file. Address: 0x000803."

Thanks for your help!
Dirk

Andy Ayre

Dirk,

Please Email me your hex file that is causing this problem. My Email address is below and on the Flash Magic web page at the bottom. Thanks.

Embedded Systems Academy, Inc.
support at esacademy dot com

Dirk Caesar

I just sent it to "info@esacademy.com".

Andy Ayre

That wasn't the right address, but my collegue will forward it to me later today. Thanks.

Embedded Systems Academy, Inc.
support at esacademy dot com

Dirk Caesar

Sorry, the problem was not on your side!
The