« previous next »
Pages: [1]

Author Topic: For first time used LPC935 with FM?  (Read 5158 times)

kaster

  • Guest
For first time used LPC935 with FM?
« on: January 26, 2005, 08:50:24 pm »
I
Logged

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2178
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: For first time used LPC935 with FM?
« Reply #1 on: January 27, 2005, 09:22:03 am »
Without seeing your board I cannot say for sure. However from the factory the device should power up into ISP mode. You can confirm this by connecting using Hyperterminal and sending a single 'U'. The 'U' should be echoed back. See the datasheet for the device and the Flash magic application notes for more information.

Logged
Embedded Systems Academy, Inc.
support at esacademy dot com

Joachim Woelk

  • Guest
Re: For first time used LPC935 with FM?
« Reply #2 on: January 31, 2005, 10:22:11 am »
If you advise FM to use DTR and RTS, you should connect these signals to your board, instead of only GND, RXD and TXD. Please search www.keil.com for a schematic of their MCB900 board, if you need to know how this should be done.
Logged
Pages: [1]
« previous next »