Author Topic: Using DRT en RTS to enter ISP  (Read 3160 times)

elleP

  • Guest
Using DRT en RTS to enter ISP
« on: April 20, 2005, 02:36:28 am »
Hello there,
I'm assisting in the developement of a LPC92x experimentation board, to be used by students. It seems practical to use DTR and RTS to enter ISP, and i've got the schematics for the keil-variant.
Flashmagic also supports a ceibo MP-900 mode, but i'm unable to find any information what this mode does, and how it should be connected.
I would like to have that info, so i can make a choice on what to implement.
The ceibo site does not give any information about this product.


Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2172
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: Using DRT en RTS to enter ISP
« Reply #1 on: April 25, 2005, 07:09:03 am »
The Ceibo hardware is identical to the MCB900. The Ceibo entry was added as a convenience for users of that product.

Embedded Systems Academy, Inc.
support at esacademy dot com