help notouch source to program 89LPC936FA

Started by pak, May 14, 2007, 06:54:16 AM

Previous topic - Next topic

pak

Hi Je Gold,
            I am a MCU hobbyist. I am interested in your notouch code from http://www.flashmagictool.com/assets/resources/NoTouchLPC93x.zip. Currently, I use 89LPC936 with MCB900 (version 4) from Keil. I have three lpc936 which cannot communicate with flash magic because of ISP corrupution. Now, I have last lpc936 that still communicate with FM. So I would like to use your notouch code to prevent the ISP corruption. I have a little knowledge of assembly language so that I used Keil C complier.
            It would be nice if you help me how to use your notouch code. Here is my hardware detail.
Board: MCB 900 version 4
MCU : P89LPC936FA
FM   : version 3.59.227


Thank in advance,
pak             

erikm

I made the original NoTouch (for the P89C51Rx2 series) and there is documentation that apply to all versions (just ignore the code) of NoTouch and it's use for developement ('the backdoor'

read those

Erik
erik

pak

Thank for fast response, Eric
          As a hobbyist, I just want to try lpc products which have several functions with 8051 core. I find that lpc MCUs are serious in programming and sensitive to common errors such as glitch of powr supply, human errors of FM. If possible, please indicate programming lpc without isp corruption. I read through the forum, still cannot find any detail instructions.
          As I mention above, please help how to use notouch with detail instructions with MCB900.

Thanks,
pak

rbtamd


If you have MCB900 version 4, please check this link http://www.keil.com/support/docs/2765.htm

Through MCB900 you can refresh yours 936 using ICP mode.

Roberto