Author Topic: LPC1853 Can't Access Flash Bank B at 0x1B000000  (Read 4463 times)

Werner

  • Jr. Member
  • **
  • Posts: 11
    • View Profile
LPC1853 Can't Access Flash Bank B at 0x1B000000
« on: December 05, 2014, 01:24:33 pm »
Hi,
when I try to program (or even blank check) Flash bank B on my LPC1853 (Rev '-'), I get an error message: "Device does not support operation (no flash memory)". But the LPC1853 does have 256kB Flash on Bank B.

The Display Memory command does work on bank B, of course it shows an empty memory, since I haven't been able to program it yet.


Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2190
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: LPC1853 Can't Access Flash Bank B at 0x1B000000
« Reply #1 on: December 08, 2014, 03:25:37 am »
Please try version 8.61 and let us know if you still have a problem with this.

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com

Werner

  • Jr. Member
  • **
  • Posts: 11
    • View Profile
Re: LPC1853 Can't Access Flash Bank B at 0x1B000000
« Reply #2 on: December 08, 2014, 05:27:20 am »
Hi Andy,

V8.61 solves the problem. What a quick response!

Best regards
Werner