Messages

1

ARM Cortex / Re: LPC1768 Ethernet Bootloader : Unable to communicate...

« on: August 10, 2015, 05:14:42 am »

No one answer??

2

ARM Cortex / Re: LPC1768 Ethernet Bootloader : Unable to communicate...

« on: August 08, 2015, 07:14:12 am »

my problem not solved.
but if you can in the next version of Flash Magic add LPC1788 ethernet bootloader .
Is it possible?
I think many people have  problem with that.

thanks

3

ARM Cortex / Re: LPC1768 Ethernet Bootloader : Unable to communicate...

« on: July 29, 2015, 08:12:32 am »

ok.thanks

4

ARM Cortex / Re: LPC1768 Ethernet Bootloader : Unable to communicate...

« on: July 29, 2015, 06:30:26 am »

i checked sbl_config.h but there is no different with LPC1788.So i changed header file and Pin selections in emac.c and uart.c after that i face to this error :

.\Obj\ethernet_bootloader.axf: Error: L6982E: AT section startup_lpc177x_8x.o(.ARM.__at_0x02FC) with base 0x000002fc limit 0x00000300 overlaps address range with AT section sbl_main.o(.ARM.__at_0x2FC) with base 0x000002fc limit 0x00000300.

what is this and how can i solve it?

5

ARM Cortex / Re: LPC1768 Ethernet Bootloader : Unable to communicate...

« on: July 28, 2015, 07:47:05 am »

may be you more explain ?
what should i do exactly?
i really need it.

6

ARM Cortex / Re: LPC1768 Ethernet Bootloader : Unable to communicate...

« on: July 28, 2015, 05:34:59 am »

thank you
it solved.
i should run Flash Magic as an administrator.
i have another question.

is there any ethernet bootloader code for LPC1788?

7

ARM Cortex / LPC1768 Ethernet Bootloader : Unable to communicate...

« on: July 24, 2015, 09:55:41 am »

hi dear
i program lpc1768 Ethernet bootloader successfully but when i program user code (Blinky sample) i face to " Unable to communicate.(handshake failed) check ethernet interface is working. " error.
i exactly follow the Flash magic manual and ethernet bootloader nxp application note. my ethernet communication is correct because i test it with keil EasyWeb.
mab you help me?

thanks