Author Topic: Is ISP hex file opened for lpc922 ?  (Read 8458 times)

shiue

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
Is ISP hex file opened for lpc922 ?
« on: November 23, 2004, 09:49:34 pm »
I am not care to erase lpc922.
So, I want to use parallel programmer to reprogram.
Where is  ISP hex file for lpc922.
Are they the same between lpc932 and lpc922 ?

shiue

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
Re: Is ISP hex file opened for lpc922 ?
« Reply #1 on: December 04, 2004, 12:57:58 am »
I use ALL-P3 programmer to program ISP into 922 chip.
ALL-P3 programmer support this function.

ISP programs are not the same between lpc932 and lpc922.

Hitesh

  • Guest
Re: Is ISP hex file opened for lpc922 ?
« Reply #2 on: December 22, 2004, 07:10:44 pm »
hello shiue,

can you tell me where all-p3 is available? and what price? apart from parallel mode, does it spport ISP/ICP also?

regards

shiue

  • Jr. Member
  • **
  • Posts: 10
    • View Profile
Re: Is ISP hex file opened for lpc922 ?
« Reply #3 on: December 31, 2004, 07:13:29 pm »
Hi,Hitesh

You can reference http://www.hilosystems.com/.

erikm

  • Guest
Re: Is ISP hex file opened for lpc922 ?
« Reply #4 on: January 04, 2005, 04:44:15 am »
>>I am not care to erase lpc922.
So, I want to use parallel programmer to reprogram.<<

You can not program flash without erasing it first.

Erik

OmarE

  • Guest
Re: Is ISP hex file opened for lpc922 ?
« Reply #5 on: January 27, 2005, 09:36:18 am »
Dear Gentlemans,
ICP is the best way to program a LPC922 once you make a mistake using ISP and changed the value of Boot Vector.
I developed an ICP programmer for LPC922 and the complete LPC series.  It is different than used in the bridge with LPC932.

Any interest you can contact me at: oespinosqeeppm.com

Regards
Omar E

OmarE

  • Guest
Re: Is ISP hex file opened for lpc922 ?
« Reply #6 on: January 27, 2005, 10:16:54 am »
Dear Gentlemans,
ICP is the best way to program a LPC922 once you make a mistake using ISP and changed the value of Boot Vector.
I developed an ICP programmer for LPC922 and the complete LPC series.  It is different than used in the bridge with LPC932.

Any interest you can contact me at: oespinosqeeppm.com

Regards
Omar E

OmarE

  • Guest
Re: Is ISP hex file opened for lpc922 ?
« Reply #7 on: January 27, 2005, 10:17:25 am »
Dear Ladies/Gentlemans,
ICP is the best way to program a LPC922 once you make a mistake using ISP and changed the value of Boot Vector.
I developed an ICP programmer for LPC922 and the complete LPC series.  It is different than used in the bridge with LPC932.

Any interest you can contact me at: oespinosqeeppm.com

Regards
Omar E