Author Topic: ICP programming LPC932A1  (Read 6223 times)

Simon

  • Guest
ICP programming LPC932A1
« on: December 26, 2004, 04:05:39 am »
Hi
I read thet new version support alsow ICP programming. I'l kike to use all 8K of flash so I need paralell or ICP. Is it possible to program with flash magic?
p.s. why do you need to set xtal ??

By Simon
Happy new year to all!

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2178
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: ICP programming LPC932A1
« Reply #1 on: December 27, 2004, 06:43:39 am »
Yes, you can use ICP with Flash Magic. To do this you need to program a device such as the LPC932 with the ISP to IAP bridge code - available as a hex file on the Flash Magic web page, towards the bottom. You then connect the LPC932 to the LPC9xx device you wish to program via ICP. The LPC932 will convert ISP commands to ICP commands and vice versa.

Details are in Philips application notes.

The xtal is used for the devices that support high speed communications.

Embedded Systems Academy, Inc.
support at esacademy dot com

Simon

  • Guest
Re: ICP programming LPC932A1
« Reply #2 on: December 29, 2004, 10:24:32 am »
Like i understand you. I choice LPC901 (or other), and connect ICP pins and thet is it?

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2178
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: ICP programming LPC932A1
« Reply #3 on: December 29, 2004, 10:33:56 am »
I gave you a description of what to do. I suggest you read the relevent application note on ICP available on www.philipsmcu.com.

Embedded Systems Academy, Inc.
support at esacademy dot com

Simon

  • Guest
Re: ICP programming LPC932A1
« Reply #4 on: December 30, 2004, 09:37:29 am »
I' will
Thenx