LPC921 - Boot vector ?

[John D. Maniraj]

Hello,

In the User Manual of P89LPC921, on page 111 it is mentioned that the boot vetor high address is 1Fh and the low address will always be 00, whereas FlashMagic menu for the LPC921 mentions the boot vector as 0x0F, which is the correct boot vector for this device.

Regards,
John.

[Andy Ayre]

It is 0FH. I think that is a cut and paste mistake in the datasheet.

[John D. Maniraj]

Thank you very much Andrew.

Regards,

John.