Author Topic: How to program hex file to P89C52X2BN  (Read 400 times)

KP

  • Jr. Member
  • **
  • Posts: 1
    • View Profile
    • Email
How to program hex file to P89C52X2BN
« on: July 08, 2020, 09:09:24 am »
Hello everybody,

Recently i purchased P89C52X2BN microcontroller.
I wrote c program in keil microvision & created hex file.

now as i use Flash Magic to burn hex file ( lastly used P89v51RD2 ic),
i tried to do so....but there is no P89C52X2BN ic in selection.

please any one guide me to successfully program this controller ic.

regards,
KP

Andy Ayre

  • ESAcademy Staff
  • Sr. Member
  • *****
  • Posts: 2172
    • View Profile
    • Embedded Systems Academy, Inc.
    • Email
Re: How to program hex file to P89C52X2BN
« Reply #1 on: July 08, 2020, 11:28:28 am »
Sorry, your part is not supported by Flash Magic. A list of supported devices can be found here. Note that you will need V11 to program 8051s:

  https://www.flashmagictool.com/supporteddevices.html

Andy
Embedded Systems Academy, Inc.
support at esacademy dot com